INDICATIONS
JANTOVEN® is indicated for:
- Prophylaxis and treatment of venous thrombosis and its
extension, pulmonary embolism (PE).
- Prophylaxis and treatment of thromboembolic complications
associated with atrial fibrillation (AF) and/or cardiac valve replacement.
- Reduction in the risk of death, recurrent myocardial
infarction (MI), and thromboembolic events such as stroke or systemic
embolization after myocardial infarction.
Limitations Of Use
Warfarin Sodium has no direct effect on an established
thrombus, nor does it reverse ischemic tissue damage. Once a thrombus has
occurred, however, the goals of anticoagulant treatment are to prevent further
extension of the formed clot and to prevent secondary thromboembolic
complications that may result in serious and possibly fatal sequelae.
DOSAGE AND ADMINISTRATION
Individualized Dosing
The dosage and administration of JANTOVEN must be
individualized for each patient according to the patient's International
Normalized Ratio (INR) response to the drug. Adjust the dose based on the patient's
INR and the condition being treated. Consult the latest evidence-based clinical
practice guidelines regarding the duration and intensity of anticoagulation for
the indicated conditions.
Recommended Target INR Ranges And Durations For
Individual Indications
An INR of greater than 4.0 appears to provide no
additional therapeutic benefit in most patients and is associated with a higher
risk of bleeding.
Venous Thromboembolism (including deep venous
thrombosis [DVT] and PE)
Adjust the warfarin dose to maintain a target INR of 2.5
(INR range, 2.0 to 3.0) for all treatment durations. The duration of treatment
is based on the indication as follows:
- For patients with a DVT or PE secondary to a transient
(reversible) risk factor, treatment with warfarin for 3 months is recommended.
- For patients with an unprovoked DVT or PE, treatment with
warfarin is recommended for at least 3 months. After 3 months of therapy,
evaluate the risk-benefit ratio of long-term treatment for the individual
patient.
- For patients with two episodes of unprovoked DVT or PE,
long-term treatment with warfarin is recommended. For a patient receiving
long-term anticoagulant treatment, periodically reassess the risk-benefit ratio
of continuing such treatment in the individual patient.
Atrial Fibrillation
In patients with non-valvular AF, anticoagulate with
warfarin to target INR of 2.5 (range, 2.0 to 3.0).
- In patients with non-valvular AF that is persistent or
paroxysmal and at high risk of stroke (i.e., having any of the following
features: prior ischemic stroke, transient ischemic attack, or systemic embolism,
or 2 of the following risk factors: age greater than 75 years, moderately or
severely impaired left ventricular systolic function and/or heart failure,
history of hypertension, or diabetes mellitus), long-term anticoagulation with
warfarin is recommended.
- In patients with non-valvular AF that is persistent or
paroxysmal and at an intermediate risk of ischemic stroke (i.e., having 1 of
the following risk factors: age greater than 75 years, moderately or severely
impaired left ventricular systolic function and/or heart failure, history of
hypertension, or diabetes mellitus), long-term anticoagulation with warfarin is
recommended.
- For patients with AF and mitral stenosis, long-term
anticoagulation with warfarin is recommended.
- For patients with AF and prosthetic heart valves,
long-term anticoagulation with warfarin is recommended; the target INR may be
increased and aspirin added depending on valve type and position, and on patient
factors.
Mechanical And Bioprosthetic Heart Valves
- For patients with a bileaflet mechanical valve or a
Medtronic Hall (Minneapolis, MN) tilting disk valve in the aortic position who
are in sinus rhythm and without left atrial enlargement, therapy with warfarin
to a target INR of 2.5 (range, 2.0 to 3.0) is recommended.
- For patients with tilting disk valves and bileaflet
mechanical valves in the mitral position, therapy with warfarin to a target INR
of 3.0 (range, 2.5 to 3.5) is recommended.
- For patients with caged ball or caged disk valves,
therapy with warfarin to a target INR of 3.0 (range, 2.5 to 3.5) is
recommended.
- For patients with a bioprosthetic valve in the mitral
position, therapy with warfarin to a target INR of 2.5 (range, 2.0 to 3.0) for the
first 3 months after valve insertion is recommended. If additional risk factors
for thromboembolism are present (AF, previous thromboembolism, left ventricular
dysfunction), a target INR of 2.5 (range, 2.0 to 3.0) is recommended.
Post-Myocardial Infarction
- For high-risk patients with MI (e.g., those with a large
anterior MI, those with significant heart failure, those with intracardiac
thrombus visible on transthoracic echocardiography, those with AF, and those
with a history of a thromboembolic event), therapy with combined
moderate-intensity (INR, 2.0 to 3.0) warfarin plus low-dose aspirin (≤100
mg/day) for at least 3 months after the MI is recommended.
Recurrent Systemic Embolism And Other Indications
Oral anticoagulation therapy with warfarin has not been
fully evaluated by clinical trials in patients with valvular disease associated
with AF, patients with mitral stenosis, and patients with recurrent systemic embolism
of unknown etiology. However, a moderate dose regimen (INR 2.0 to 3.0) may be
used for these patients.
Initial And Maintenance Dosing
The appropriate initial dosing of JANTOVEN varies widely
for different patients. Not all factors responsible for warfarin dose
variability are known, and the initial dose is influenced by:
- Clinical factors including age, race, body weight, sex,
concomitant medications, and comorbidities
- Genetic factors (CYP2C9 and VKORC1 genotypes) [see CLINICAL
PHARMACOLOGY]
Select the initial dose based on the expected maintenance
dose, taking into account the above factors. Modify this dose based on consideration
of patient-specific clinical factors. Consider lower initial and maintenance
doses for elderly and/or debilitated patients and in Asian patients [see Use
In Specific Populations and CLINICAL PHARMACOLOGY]. Routine use of
loading doses is not recommended as this practice may increase hemorrhagic and
other complications and does not offer more rapid protection against clot
formation.
Individualize the duration of therapy for each patient.
In general, anticoagulant therapy should be continued until the danger of
thrombosis and embolism has passed [see Recommended Target INR Ranges And Durations For
Individual Indications].
Dosing Recommendations Without Consideration Of Genotype
If the patient's CYP2C9 and VKORC1 genotypes are not
known, the initial dose of JANTOVEN is usually 2 to 5 mg once daily. Determine
each patient's dosing needs by close monitoring of the INR response and
consideration of the indication being treated. Typical maintenance doses are 2
to 10 mg once daily.
Dosing Recommendations With Consideration Of Genotype
Table 1 displays three ranges of expected maintenance
JANTOVEN doses observed in subgroups of patients having different combinations
of CYP2C9 and VKORC1 gene variants [see CLINICAL PHARMACOLOGY]. If the
patient's CYP2C9 and/or VKORC1 genotype are known, consider these ranges in
choosing the initial dose. Patients with CYP2C9 *1/*3, *2/*2, *2/*3, and *3/*3
may require more prolonged time (>2 to 4 weeks) to achieve maximum INR
effect for a given dosage regimen than patients without these CYP variants.
Table 1: Three Ranges of Expected Maintenance JANTOVEN
Daily Doses Based on CYP2C9 and VKORC1 Genotypes*
VKORC1 |
CYP2C9 |
*1/*1 |
*1/*2 |
*1/*3 |
*2/*2 |
*2/*3 |
*3/*3 |
GG |
5-7 mg |
5-7 mg |
3-4 mg |
3-4 mg |
3-4 mg |
0.5-2 mg |
AG |
5-7 mg |
3-4 mg |
3-4 mg |
3-4 mg |
0.5-2 mg |
0.5-2 mg |
AA |
3-4 mg |
3-4 mg |
0.5-2 mg |
0.5-2 mg |
0.5-2 mg |
0.5-2 mg |
*Ranges are derived from multiple published clinical
studies. VKORC1-1639G>A (rs9923231) variant is used in this table. Other
co-inherited VKORC1 variants may also be important determinants of warfarin
dose. |
Monitoring To Achieve Optimal Anticoagulation
JANTOVEN has a narrow therapeutic range (index), and its
action may be affected by factors such as other drugs and dietary vitamin K.
Therefore, anticoagulation must be carefully monitored during JANTOVEN therapy.
Determine the INR daily after the administration of the initial dose until INR results
stabilize in the therapeutic range. After stabilization, maintain dosing within
the therapeutic range by performing periodic INRs. The frequency of performing
INR should be based on the clinical situation but generally acceptable
intervals for INR determinations are 1 to 4 weeks. Perform additional INR tests
when other warfarin products are interchanged with JANTOVEN, as well as
whenever other medications are initiated, discontinued, or taken irregularly.
Heparin, a common concomitant drug, increases the INR [see Conversion From Other Anticoagulants and DRUG INTERACTIONS].
Determinations of whole blood clotting and bleeding times
are not effective measures for monitoring of JANTOVEN therapy.
Renal Impairment
No dosage adjustment is necessary for patients with renal
failure. Monitor INR more frequently in patients with compromised renal
function to maintain INR within the therapeutic range [see WARNINGS AND
PRECAUTIONS and Use In Specific Populations].
Missed Dose
The anticoagulant effect of JANTOVEN persists beyond 24
hours. If a patient misses a dose of JANTOVEN at the intended time of day, the
patient should take the dose as soon as possible on the same day. The patient
should not double the dose the next day to make up for a missed dose.
Treatment During Dentistry And Surgery
Some dental or surgical procedures may necessitate the
interruption or change in the dose of JANTOVEN therapy. Consider the benefits
and risks when discontinuing JANTOVEN even for a short period of time.
Determine the INR immediately prior to any dental or surgical procedure. In
patients undergoing minimally invasive procedures who must be anticoagulated
prior to, during, or immediately following these procedures, adjusting the
dosage of JANTOVEN to maintain the INR at the low end of the therapeutic range
may safely allow for continued anticoagulation.
Conversion From Other Anticoagulants
Heparin
Since the full anticoagulant effect of JANTOVEN is not
achieved for several days, heparin is preferred for initial rapid
anticoagulation. During initial therapy with JANTOVEN, the interference with
heparin anticoagulation is of minimal clinical significance. Conversion to
JANTOVEN may begin concomitantly with heparin therapy or may be delayed 3 to 6
days. To ensure therapeutic anticoagulation, continue full dose heparin therapy
and overlap JANTOVEN therapy with heparin for 4 to 5 days and until JANTOVEN
has produced the desired therapeutic response as determined by INR, at which
point heparin may be discontinued.
As heparin may affect the INR, patients receiving both
heparin and JANTOVEN should have INR monitoring at least:
- 5 hours after the last intravenous bolus dose of heparin,
or
- 4 hours after cessation of a continuous intravenous
infusion of heparin, or
- 24 hours after the last subcutaneous heparin injection.
JANTOVEN may increase the activated partial
thromboplastin time (aPTT) test, even in the absence of heparin. A severe
elevation (>50 seconds) in aPTT with an INR in the desired range has been
identified as an indication of increased risk of postoperative hemorrhage.
Other Anticoagulants
Consult the labeling of other anticoagulants for
instructions on conversion to JANTOVEN.
HOW SUPPLIED
Dosage Forms And Strengths
JANTOVEN tablets are single scored, compressed tablets
with one side scored and debossed with WRF above the score and 1, 2, 2½, 3, 4,
5, 6, 7½, or 10 below the score and with 832 debossed on the opposite side.
JANTOVEN tablets are supplied in the following strengths:
JANTOVEN Tablets
Strength |
Color |
1 mg |
pink |
2 mg |
lavender |
2½ mg |
green |
3 mg |
tan |
4 mg |
blue |
5 mg |
peach |
6 mg |
teal |
7½ mg |
yellow |
10 mg |
white (dye free) |
Storage And Handling
Tablets
JANTOVEN tablets are single scored, compressed tablets
with one side scored and debossed with WRF above the score and 1, 2, 2½, 3, 4,
5, 6, 7½, or 10 below the score and with 832 debossed on the opposite side.
JANTOVEN is available in bottles and unit dose blister packages with potencies
and colors as follows:
1 mg - Compressed tablet, pink, round; in bottles of 100
(NDC 0832-1211-00) and 1000 (NDC 0832- 1211-10) and in unit dose cartons of 100
tablets (10 cards containing 10 tablets each) (NDC 0832-1211- 01).
2 mg - Compressed tablet, lavender, round; in bottles of
100 (NDC 0832-1212-00) and 1000 (NDC 0832-1212-10) and in unit dose cartons of
100 tablets (10 cards containing 10 tablets each) (NDC 0832- 1212-01).
2½ mg - Compressed tablet, green, round; in bottles of
100 (NDC 0832-1213-00) and 1000 (NDC 0832-1213-10) and in unit dose cartons of
100 tablets (10 cards containing 10 tablets each) (NDC 0832- 1213-01).
3 mg - Compressed tablet, tan, round; in bottles of 100
(NDC 0832-1214-00) and 1000 (NDC 0832- 1214-10) and in unit dose cartons of 100
tablets (10 cards containing 10 tablets each) (NDC 0832-1214- 01).
4 mg - Compressed tablet, blue, round; in bottles of 100
(NDC 0832-1215-00) and 1000 (NDC 0832- 1215-10) and in unit dose cartons of 100
tablets (10 cards containing 10 tablets each) (NDC 0832-1215- 01).
5 mg - Compressed tablet, peach, round; in bottles of 100
(NDC 0832-1216-00) and 1000 (NDC 0832- 1216-10) and in unit dose cartons of 100
tablets (10 cards containing 10 tablets each) (NDC 0832-1216- 01).
6 mg - Compressed tablet, teal, round; in bottles of 100
(NDC 0832-1217-00) and 1000 (NDC 0832- 1217-10) and in unit dose cartons of 100
tablets (10 cards containing 10 tablets each) (NDC 0832-1217- 01).
7½ mg - Compressed tablet, yellow, round; in bottles of
100 (NDC 0832-1218-00) and 500 (NDC 0832-1218-50) and in unit dose cartons of
100 tablets (10 cards containing 10 tablets each) (NDC 0832- 1218-01).
10 mg - Compressed tablet, white (dye-free), round; in
bottles of 100 (NDC 0832-1219-00) and 500 (NDC 0832-1219-50) and in unit dose
cartons of 100 tablets (10 cards containing 10 tablets each) (NDC 0832-1219-01).
Store at 20° to 25°C (68° to 77°F). Excursions permitted
to 15° to 30°C (59° to 86°F). [See USP Controlled Room Temperature.]
Protect from light and moisture. Dispense in a tight, light-resistant container
with a child-resistant closure.
Special Handling
Procedures for proper handling and disposal of
potentially hazardous drugs should be considered. Guidelines on this subject
have been published [see REFERENCES].
Pharmacy and clinical personnel who are pregnant should
avoid exposure to crushed or broken tablets [see Use In Specific Populations].
REFERENCES
OSHA Hazardous Drugs. OSHA.
http://www.osha.gov/SLTC/hazardousdrugs/index.html.
Manufactured by: UPSHER-SMITH LABORATORIES, LLC, Maple
Grove, MN 55369. Revised : Sep 2017