INDICATIONS
Dextrose (hydrous dextrose (hydrous dextrose) ) Injection, USP is indicated as a source of water and calories.
DOSAGE AND ADMINISTRATION
As directed by a physician. Dosage is dependent upon the age, weight and clinical
condition of the patient as well as laboratory determinations.
Parenteral drug products should be inspected visually for particulate matter
and discoloration prior to administration whenever solution and container permit.
All injections in VIAFLEX plastic containers are intended for intravenous administration
using sterile equipment.
Additives may be incompatible. Complete information is not available.
Those additives known to be incompatible should not be used. Consult with pharmacist,
if available. If, in the informed judgment of the physician, it is deemed advisable
to introduce additives, use aseptic technique. Mix thoroughly when additives
have been introduced. Do not store solutions containing additives.
HOW SUPPLIED
Dextrose (hydrous dextrose (hydrous dextrose) ) Injection, USP in VIAFLEX plastic container is available as follows:
Code |
Size |
( mL) |
NDC |
Product Name |
2B0080 |
25 |
Quad pack |
0338-0017-10 |
5% Dextrose Injection, USP |
2B0086 |
50 |
Single pack |
0338-0017-41 |
|
2B0081 |
|
Quad pack |
0338-0017-11 |
5% Dextrose Injection, USP |
2B0088 |
|
Multi pack |
0338-0017-31 |
|
2B0087 |
100 |
Single pack |
0338-0017-48 |
|
2B0082 |
|
Quad pack |
0338-0017-18 |
|
2B0089 |
|
Multi pack |
0338-0017-38 |
|
2B0061 |
150 |
|
0338-0017-01 |
5% Dextrose Injection, USP |
2B0062 |
250 |
|
0338-0017-02 |
|
2B0063 |
500 |
|
0338-0017-03 |
|
2B0064 |
1000 |
|
0338-0017-04 |
|
2B0162 |
250 |
|
0338-0023-02 |
|
2B0163 |
500 |
|
0338-0023-03 |
10% Dextrose Injection, USP |
2B0164 |
1000 |
|
0338-0023-04 |
|
Exposure of pharmaceutical products to heat should be minimized. Avoid excessive
heat. It is recommended the product be stored at room temperature (25deg;C/
77deg;F); brief exposure up to 40deg;C/ 104deg;F does not adversely affect the
product.
Directions For Use Of Viaflex Plastic Container
Warning: Do not use plastic containers in series connections. Such use
could result in air embolism due to residual air being drawn from the primary
container before administration of the fluid from the secondary container is
completed.
To Open
Tear overwrap down side at slit and remove solution container. Some opacity
of the plastic due to moisture absorption during the sterilization process may
be observed. This is normal and does not affect the solution quality or safety.
The opacity will diminish gradually. Check for minute leaks by squeezing inner
bag firmly. If leaks are found, discard solution as sterility may be impaired.
If supplemental medication is desired, follow “ To Add Medication”
directions below.
Preparation for Administration
Suspend container from eyelet support.
Remove plastic protector from outlet port at bottom of container.
Attach administration set. Refer to complete directions accompanying set.
To Add Medication
Warning: Additives may be incompatible.
To add medication before solution administration
Prepare medication site.
Using syringe with 19 to 22 gauge needle, puncture resealable medication
port and inject.
Mix solution and medication thoroughly. For high density medication such
as potassium chloride, squeeze ports while ports are upright and mix thoroughly.
To add medication during solution administration
Close clamp on the set.
Prepare medication site.
Using syringe with 19 to 22 gauge needle, puncture resealable medication
port and inject.
Remove container from IV pole and/or turn to an upright position.
Evacuate both ports by squeezing them while container is in the upright
position.
Mix solution and medication thoroughly.
Return container to in-use position and continue administration.
Baxter Healthcare Corporation, Deerfield, IL 60015 USA. FDA revision date: n/a