Uses for Cystografin
Cystografin is indicated for retrograde cystourethrography.
Dosage for Cystografin
Preparation of the Patient
Appropriate preparation is desirable for optimal results. A laxative the night before the examination and a low residue diet the day before the procedure are recommended.
Dosage
The dose for retrograde use in cystography and voiding cystourethrography ranges from 25 to 300 mL depending on the age of the patient and the degree of bladder irritability; amounts greater than 300 mL may be used if the bladder capacity allows. Best results are obtained when the bladder is filled with the contrast agent. If desired, the preparation may be diluted with sterile water or sterile saline as indicated in the table below.
Administration
After sterile catheterization, the bladder should be filled to capacity with Cystografin using a suitable sterile administration set. Care should be taken to avoid using excessive pressure. The presence of bladder discomfort or reflux and/or spontaneous voiding usually indicates that the bladder is full.
Radiography
The commonly employed radiographic techniques should be used. A scout film is recommended before the contrast agent is administered.
Dilution Table
USE DILUTED SOLUTIONS IMMEDIATELY
100 mL Bottle Sterile Water or Sterile Saline Added | % Diatrizoate Meglumine w/v | % Organically Bound Iodine w/v | Total Volume |
| 0 mL | 30.0 | 14.1 | 100 mL |
| 25 mL | 24.0 | 11.3 | 125 mL |
| 50 mL | 20.0 | 9.4 | 150 mL |
| 67 mL | 18.0 | 8.5 | 167 mL |
300 mL Bottle Sterile Water or Sterile Saline Added |
| 0 mL | 30.0 | 14.1 | 300 mL |
| 50 mL | 25.7 | 12.1 | 350 mL |
HOW SUPPLIED
Cystografin (Diatrizoate Meglumine Injection USP 30%) is available in 200 mL and 400 mL bottles containing 100 mL and 300 mL of Cystografin respectively with sufficient capacity for dilution up to 167 mL and 350 mL respectively.
Storage
Store at 20-25°C (68-77°F) [See USP]. Protect from light.
Also Available
Cystografin Dilute (Diatrizoate Meglumine Injection USP 18%) is also available, as a 300 mL fill in a 400 mL bottle.
Manufactured for: Bracco Diagnostics Inc., Monroe Township, NJ 08831, by Patheon Italia S.p.A. 03013 Ferentino (Italy). Revised: Apr 2018