You are here
Home > Medical Calculator > Alteplase (Activase) Calculator – Thrombolytic

Alteplase (Activase®) Calculator  (Adult patients)

Weight:
Select INDICATION:

Background Info

INDICATIONS AND USAGE
Acute Myocardial Infarction
Activase® (Alteplase) is indicated for use in the management of acute myocardial infarction in adults for the improvement of ventricular function following AMI, the reduction of the incidence of congestive heart failure, and the reduction of mortality associated with AMI. Treatment should be initiated as soon as possible after the onset of AMI symptoms.

Acute Ischemic Stroke
Activase® (Alteplase) is indicated for the management of acute ischemic stroke in adults for improving neurological recovery and reducing the incidence of disability. Treatment should only be initiated within 3 hours after the onset of stroke symptoms, and after exclusion of intracranial hemorrhage by a cranial computerized tomography (CT) scan or other diagnostic imaging method sensitive for the presence of hemorrhage (see CONTRAINDICATIONS).

Pulmonary Embolism
Activase® (Alteplase) is indicated in the management of acute massive pulmonary embolism (PE) in adults:
  --For the lysis of acute pulmonary emboli, defined as obstruction of blood flow to a lobe or multiple segments of the lungs.
  --For the lysis of pulmonary emboli accompanied by unstable hemodynamics, e.g., failure to maintain blood pressure without supportive measures.

The diagnosis should be confirmed by objective means, such as pulmonary angiography or noninvasive procedures such as lung scanning.

--------------------------------------------------------------
CONTRAINDICATIONS
--------------------------------------------------------------
Acute Myocardial Infarction or Pulmonary Embolism

Activase therapy in patients with acute myocardial infarction or pulmonary embolism is contraindicated in the following situations because of an increased risk of bleeding:
  • Active internal bleeding
  • History of cerebrovascular accident
  • Recent intracranial or intraspinal surgery or trauma (see package insert for WARNINGS)
  • Intracranial neoplasm, arteriovenous malformation, or aneurysm
  • Known bleeding diathesis
  • Severe uncontrolled hypertension
Acute Ischemic Stroke
Activase therapy in patients with acute ischemic stroke is contraindicated in the following situations because of an increased risk of bleeding, which could result in significant disability or death:
  • Evidence of intracranial hemorrhage on pretreatment evaluation
  • Suspicion of subarachnoid hemorrhage on pretreatment evaluation
  • Recent (within 3 months) intracranial or intraspinal surgery, serious head trauma, or previous stroke
  • History of intracranial hemorrhage
  • Uncontrolled hypertension at time of treatment (e.g., > 185 mm Hg systolic or > 110 mm Hg diastolic)
  • Seizure at the onset of stroke
  • Active internal bleeding
  • Intracranial neoplasm, arteriovenous malformation, or aneurysm
  • Known bleeding diathesis including but not limited to:
    • Current use of oral anticoagulants (e.g., warfarin sodium) or an International Normalized Ratio (INR)>1.7 or a prothrombin time (PT) > 15 seconds
    • Administration of heparin within 48 hours preceding the onset of stroke and have an elevated activated partial thromboplastin time (aPTT) at presentation
    • Platelet count < 100,000/mm3

--------------------------------------------------------------
WARNINGS
--------------------------------------------------------------
Bleeding
The most common complication encountered during Activase therapy is bleeding. The type of bleeding associated with thrombolytic therapy can be divided into two broad categories:

    >Internal bleeding, involving intracranial and retroperitoneal sites, or the gastrointestinal, genitourinary, or respiratory tracts.
    >Superficial or surface bleeding, observed mainly at invaded or disturbed sites (e.g., venous cutdowns, arterial punctures, sites of recent surgical intervention).

The concomitant use of heparin anticoagulation may contribute to bleeding. Some of the hemorrhage episodes occurred 1 or more days after the effects of Activase had dissipated, but while heparin therapy was continuing.

As fibrin is lysed during Activase therapy, bleeding from recent puncture sites may occur. Therefore, thrombolytic therapy requires careful attention to all potential bleeding sites (including catheter insertion sites, arterial and venous puncture sites, cutdown sites, and needle puncture sites).

Intramuscular injections and nonessential handling of the patient should be avoided during treatment with Activase. Venipunctures should be performed carefully and only as required.

Should an arterial puncture be necessary during an infusion of Activase, it is preferable to use an upper extremity vessel that is accessible to manual compression. Pressure should be applied for at least 30 minutes, a pressure dressing applied, and the puncture site checked frequently for evidence of bleeding.

Should serious bleeding (not controllable by local pressure) occur, the infusion of Activase and any concomitant heparin should be terminated immediately.

Each patient being considered for therapy with Activase should be carefully evaluated and anticipated benefits weighed against potential risks associated with therapy.

In the following conditions, the risks of Activase therapy for all approved indications may be increased and should be weighed against the anticipated benefits:
  • Recent major surgery, e.g., coronary artery bypass graft, obstetrical delivery, organ biopsy, previous puncture of noncompressible vessels
  • Cerebrovascular disease
  • Recent gastrointestinal or genitourinary bleeding
  • Recent trauma
  • Hypertension: systolic BP >/=175 mm Hg and/or diastolic BP >/=110 mm Hg
  • High likelihood of left heart thrombus, e.g., mitral stenosis with atrial fibrillation
  • Acute pericarditis
  • Subacute bacterial endocarditis
  • Hemostatic defects including those secondary to severe hepatic or renal disease
  • Significant hepatic dysfunction
  • Pregnancy
  • Diabetic hemorrhagic retinopathy, or other hemorrhagic ophthalmic conditions
  • Septic thrombophlebitis or occluded AV cannula at seriously infected site
  • Advanced age (e.g., over 75 years old)
  • Patients currently receiving oral anticoagulants, e.g., warfarin sodium
  • Any other condition in which bleeding constitutes a significant hazard or would be particularly difficult to manage because of its location
Cholesterol Embolization
Cholesterol embolism has been reported rarely in patients treated with all types of thrombolytic agents; the true incidence is unknown. This serious condition, which can be lethal, is also associated with invasive vascular procedures (e.g., cardiac catheterization, angiography, vascular surgery) and/or anticoagulant therapy. Clinical features of cholesterol embolism may include livedo reticularis, "purple toe" syndrome, acute renal failure, gangrenous digits, hypertension, pancreatitis, myocardial infarction, cerebral infarction, spinal cord infarction, retinal artery occlusion, bowel infarction, and rhabdomyolysis.

Use in Acute Myocardial Infarction
In a small subgroup of AMI patients who are at low risk for death from cardiac causes (i.e., no previous myocardial infarction, Killip class I) and who have high blood pressure at the time of presentation, the risk for stroke may offset the survival benefit produced by thrombolytic therapy.

Arrhythmias:
Coronary thrombolysis may result in arrhythmias associated with reperfusion. These arrhythmias (such as sinus bradycardia, accelerated idioventricular rhythm, ventricular premature depolarizations, ventricular tachycardia) are not different from those often seen in the ordinary course of acute myocardial infarction and may be managed with standard antiarrhythmic measures. It is recommended that antiarrhythmic therapy for bradycardia and/or ventricular irritability be available when infusions of Activase are administered.

Use in Acute Ischemic Stroke
In addition to the previously listed conditions, the risks of Activase therapy to treat acute ischemic stroke may be increased in the following conditions and should be weighed against the anticipated benefits:
    >Patients with severe neurological deficit (e.g., NIHSS > 22) at presentation. There is an increased risk of intracranial hemorrhage in these patients.
    >Patients with major early infarct signs on a computerized cranial tomography (CT) scan (e.g., substantial edema, mass effect, or midline shift).

In patients without recent use of oral anticoagulants or heparin, Activase treatment can be initiated prior to the availability of coagulation study results. However, infusion should be discontinued if either a pretreatment International Normalized Ratio (INR) > 1.7 or a prothrombin time (PT) > 15 seconds or an elevated activated partial thromboplastin time (aPTT) is identified.

Treatment should be limited to facilities that can provide appropriate evaluation and management of ICH.

In acute ischemic stroke, neither the incidence of intracranial hemorrhage nor the benefits of therapy are known in patients treated with Activase more than 3 hours after the onset of symptoms. Therefore, treatment of patients with acute ischemic stroke more than 3 hours after symptom onset is not recommended.

Due to the increased risk for misdiagnosis of acute ischemic stroke, special diligence is required in making this diagnosis in patients whose blood glucose values are < 50 mg/dL or > 400 mg/dL. The safety and efficacy of treatment with Activase in patients with minor neurological deficit or with rapidly improving symptoms prior to the start of Activase administration has not been evaluated. Therefore, treatment of patients with minor neurological deficit or with rapidly improving symptoms is not recommended.

Use in Pulmonary Embolism
It should be recognized that the treatment of pulmonary embolism with Activase has not been shown to constitute adequate clinical treatment of underlying deep vein thrombosis. Furthermore, the possible risk of reembolization due to the lysis of underlying deep venous thrombi should be considered.



--------------------------------------------------------------
DOSAGE AND ADMINISTRATION
--------------------------------------------------------------
Activase® (Alteplase) is for intravenous administration only. Extravasation of Activase infusion can cause ecchymosis and/or inflammation. Management consists of terminating the infusion at that IV site and application of local therapy.

Acute Myocardial Infarction
Administer Activase as soon as possible after the onset of symptoms.
There are two Activase dose regimens for use in the management of acute myocardial infarction; controlled studies to compare clinical outcomes with these regimens have not been conducted.

--------------------------------------
Accelerated Infusion
--------------------------------------

The recommended total dose is based upon patient weight, not to exceed 100 mg. For patients weighing > 67 kg, the recommended dose administered is 100 mg as a 15 mg intravenous bolus, followed by 50 mg infused over the next 30 minutes, and then 35 mg infused over the next 60 minutes.

For patients weighing </= 67 kg, the recommended dose is administered as a 15 mg intravenous bolus, followed by 0.75 mg/kg infused over the next 30 minutes not to exceed 50 mg, and then 0.50 mg/kg over the next 60 minutes not to exceed 35 mg.

The safety and efficacy of this accelerated infusion of Alteplase regimen has only been investigated with concomitant administration of heparin and aspirin as described in CLINICAL PHARMACOLOGY (see package insert).

a. The bolus dose may be prepared in one of the following ways:
         1.  By removing 15 mL from the vial of reconstituted (1 mg/mL) Activase using a syringe and needle. If this method is used with the 50 mg vials, the syringe should not be primed with air and the needle should be inserted into the Activase vial stopper. If the 100 mg vial is used, the needle should be inserted away from the puncture mark made by the transfer device.
         2. By removing 15 mL from a port (second injection site) on the infusion line after the infusion set is primed.
         3.  By programming an infusion pump to deliver a 15 mL (1 mg/mL) bolus at the initiation of the infusion.

b. The remainder of the Activase dose may be administered as follows:
   50 mg vials -- administer using either a polyvinyl chloride bag or glass vial and infusion set.

  100 mg vial -- insert the spike end of an infusion set through the same puncture site created by the transfer device in the stopper of the vial of reconstituted Activase. Peel the clear plastic hanger from the vial label. Hang the Activase vial from the resulting loop.

--------------------------------------
3-Hour Infusion
--------------------------------------
The recommended dose is 100 mg administered as 60 mg in the first hour (of which 6 to 10 mg is administered as a bolus), 20 mg over the second hour, and 20 mg over the third hour. For smaller patients (< 65 kg), a dose of 1.25 mg/kg administered over 3 hours, as described above, may be used.

Although the value of the use of anticoagulants during and following administration of Activase has not been fully studied, heparin has been administered concomitantly for 24 hours or longer in more than 90% of patients.

Aspirin and/or dipyridamole have been given to patients receiving Alteplase during and/or following heparin treatment.

a. The bolus dose may be prepared in one of the following ways:
    1.  By removing 6 to 10 mL from the vial of reconstituted (1 mg/mL) Activase using a syringe and needle. If this method is used with the 50 mg vials, the syringe should not be primed with air and the needle should be inserted into the Activase vial stopper. If the 100 mg vial is used, the needle should be inserted away from the puncture mark made by the transfer device.
    2.  By removing 6 to 10 mL from a port (second injection site) on the infusion line after the infusion set is primed.
    3. By programming an infusion pump to deliver a 6 to 10 mL (1 mg/mL) bolus at the initiation of the infusion.

b. The remainder of the Activase dose may be administered as follows:

50 mg vials -- administer using either a polyvinyl chloride bag or glass vial and infusion set.

100 mg vial -- insert the spike end of an infusion set through the same puncture site created by the transfer device in the stopper of the vial of reconstituted Activase. Peel the clear plastic hanger from the vial label. Hang the Activase vial from the resulting loop.


Acute Ischemic Stroke
THE TOTAL DOSE FOR TREATMENT OF ACUTE ISCHEMIC STROKE SHOULD NOT EXCEED 90 mg.

The recommended dose is 0.9 mg/kg (not to exceed 90 mg total dose) infused over 60 minutes with 10% of the total dose administered as an initial intravenous bolus over 1 minute.

The safety and efficacy of this regimen with concomitant administration of heparin and aspirin during the first 24 hours after symptom onset has not been investigated.

a. The bolus dose may be prepared in one of the following ways:
    1.  By removing the appropriate volume from the vial of reconstituted (1 mg/mL) Activase using a syringe and needle. If this method is used with the 50 mg vials, the syringe should not be primed with air and the needle should be inserted into the Activase vial stopper. If the 100 mg vial is used, the needle should be inserted away from the puncture mark made by the transfer device.
    2. By removing the appropriate volume from a port (second injection site) on the infusion line after the infusion set is primed.
    3. By programming an infusion pump to deliver the appropriate volume as a bolus at the initiation of the infusion.

b. The remainder of the Activase dose may be administered as follows:
50 mg vials -- administer using either a polyvinyl chloride bag or glass vial and infusion set.

100 mg vial -- remove from the vial any quantity of drug in excess of that specified for patient treatment. Insert the spike end of an infusion set through the same puncture site created by the transfer device in the stopper of the vial of reconstituted Activase. Peel the clear plastic hanger from the vial label. Hang the Activase vial from the resulting loop.

Pulmonary Embolism
The recommended dose is 100 mg administered by intravenous infusion over 2 hours. Heparin therapy should be instituted or reinstituted near the end of or immediately following the Activase infusion when the partial thromboplastin time or thrombin time returns to twice normal or less.

The Activase dose may be administered as follows:
50 mg vials -- administer using either a polyvinyl chloride bag or glass vial and infusion set.

100 mg vial -- insert the spike end of an infusion set through the same puncture site created by the transfer device in the stopper of the vial of reconstituted Activase. Peel the clear plastic hanger from the vial label. Hang the Activase vial from the resulting loop.


--------------------------------------------------------------
Reconstitution and Dilution
--------------------------------------------------------------
Activase should be reconstituted by aseptically adding the appropriate volume of the accompanying Sterile Water for Injection, USP, to the vial. It is important that Activase be reconstituted only with Sterile Water for Injection, USP, without preservatives. Do not use Bacteriostatic Water for Injection, USP. The reconstituted preparation results in a colorless to pale yellow transparent solution containing Activase 1 mg/mL at approximately pH 7.3. The osmolality of this solution is approximately 215 mOsm/kg.

Because Activase contains no antibacterial preservatives, it should be reconstituted immediately before use. The solution may be used for intravenous administration within 8 hours following reconstitution when stored between 2°-30°C (36°-86°F). Before further dilution or administration, the product should be visually inspected for particulate matter and discoloration prior to administration whenever solution and container permit.

Activase may be administered as reconstituted at 1 mg/mL. As an alternative, the reconstituted solution may be diluted further immediately before administration in an equal volume of 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP, to yield a concentration of 0.5 mg/mL. Either polyvinyl chloride bags or glass vials are acceptable. Activase is stable for up to 8 hours in these solutions at room temperature. Exposure to light has no effect on the stability of these solutions. Excessive agitation during dilution should be avoided; mixing should be accomplished with gentle swirling and/or slow inversion. Do not use other infusion solutions, e.g., Sterile Water for Injection, USP, or preservative-containing solutions for further dilution.

50 mg Vials
Reconstitution should be carried out using a large bore needle (e.g., 18 gauge) and a syringe, directing the stream of Sterile Water for Injection, USP, into the lyophilized cake. DO NOT USE IF VACUUM IS NOT PRESENT. Slight foaming upon reconstitution is not unusual; standing undisturbed for several minutes is usually sufficient to allow dissipation of any large bubbles.

No other medication should be added to infusion solutions containing Activase. Any unused infusion solution should be discarded.

100 mg Vial
Reconstitution should be carried out using the transfer device provided, adding the contents of the accompanying 100 mL vial of Sterile Water for Injection, USP, to the contents of the 100 mg vial of Activase powder. Slight foaming upon reconstitution is not unusual; standing undisturbed for several minutes is usually sufficient to allow dissipation of any large bubbles. Please refer to the accompanying Instructions for Reconstitution and Administration. 100 mg VIALS DO NOT CONTAIN VACUUM.

100 mg VIAL RECONSTITUTION:
  1. Use aseptic technique throughout.
  2. Remove the protective flip-caps from one vial of Activase and one vial of Sterile Water for Injection, USP (SWFI).
  3. Open the package containing the transfer device by peeling the paper label off the package.
  4. Remove the protective cap from one end of the transfer device and keeping the vial of SWFI upright, insert the piercing pin vertically into the center of the stopper of the vial of SWFI.
  5. Remove the protective cap from the other end of the transfer device. DO NOT INVERT THE VIAL OF SWFI.
  6. Holding the vial of Activase upside-down, position it so that the center of the stopper is directly over the exposed piercing pin of the transfer device.
  7. Push the vial of Activase down so that the piercing pin is inserted through the center of the Activase vial stopper.
  8. Invert the two vials so that the vial of Activase is on the bottom (upright) and the vial of SWFI is upside-down, allowing the SWFI to flow down through the transfer device. Allow the entire contents of the vial of SWFI to flow into the Activase vial (approximately 0.5 cc of SWFI will remain in the diluent vial). Approximately 2 minutes are required for this procedure.
  9. Remove the transfer device and the empty SWFI vial from the Activase vial. Safely discard both the transfer device and the empty diluent vial according to institutional procedures.
  10. Swirl gently to dissolve the Activase powder. DO NOT SHAKE.
No other medication should be added to infusion solutions containing Activase.
Any unused infusion solution should be discarded.

HOW SUPPLIED
Activase® (Alteplase), is supplied as a sterile, lyophilized powder in 50 mg vials containing vacuum and in 100 mg vials without vacuum.

Each 50 mg Activase vial (29 million IU) is packaged with diluent for reconstitution (50 mL Sterile Water for Injection, USP): NDC 50242-044-13.

Each 100 mg Activase vial (58 million IU) is packaged with diluent for reconstitution (100 mL Sterile Water for Injection, USP), and one transfer device: NDC 50242-085-27.

Storage
Store lyophilized Activase at controlled room temperature not to exceed 30°C (86°F), or under refrigeration (2°-8°C/36°-46°F). Protect the lyophilized material during extended storage from excessive exposure to light.
Do not use beyond the expiration date stamped on the vial.

References

1]  Package insert data:  ACTIVASE (alteplase) kit  [Genentech, Inc.]   Date accessed: May 28,2014. 

Activase® (Alteplase)  Manufactured by: GENENTECH, INC.  A Member of the Roche Group 1 DNA Way
South San Francisco, CA 94080-4990.  LB0974  (4851000)  Revision Date April 2011.   FDA Approval Date May 2002. © 2011 Genentech, Inc.

Alteplase (Activase) Calculator – Thrombolytic

thpxl