Infliximab
Reconstitution and dilutionFull monograph review pending
Historical dilution reference. Verify the preparation against the label for the product in hand.
Original GlobalRPh article: Remicade ®- Infliximab (opens in a new tab)Original source URL: https://globalrph.com/dilution/remicade-infliximab/ Retrieved 2026-11-04
Historical source details
Original publication date: unavailable in the retrieved article.
Source location and file checksums
- Original source URL
- https://globalrph.com/dilution/remicade-infliximab/ (opens in a new tab)
- Source date
- Not established in the retrieved source
- Retrieved
- 2026-11-04T19:50:31.638120+00:00
- Source location
- div.post-content
- Packaged content SHA-256
- 98397dfbbbb34679170df1a5238bdadb85aa353fab16e967681fdd3aa6f1d8b7
- Original response SHA-256
- 57866268e02e3309ac4aba4ff7170b112ef0dec1bf850513e600412675227e1c
- Source body SHA-256
- 340945cd41cc2e64fc58ef35702f62f90b199579dd23d5d1a8aff761230b0a8e
Infliximab (Remicade ® ) |
| The authors make no claims of the accuracy of the information contained herein; and these suggested doses and/or guidelines are not a substitute for clinical judgment. Neither GlobalRPh Inc. nor any other party involved in the preparation of this document shall be liable for any special, consequential, or exemplary damages resulting in whole or part from any user's use of or reliance upon this material. PLEASE READ THE DISCLAIMER CAREFULLY BEFORE ACCESSING OR USING THIS SITE. BY ACCESSING OR USING THIS SITE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS SET FORTH IN THE DISCLAIMER. |
Usual Diluents |
| NS |
Standard Dilutions [Amount of drug] [Infusion volume] [Infusion rate] |
| [Prescribed dose] [250 ml] [2 hours] Recommended conc: 0.4 to 4 mg/ml Infusions less than 2 hours are not recommended. |
Stability / Miscellaneous |
| Stability: Use immediately. Infusion should begin within 3 hours of preparation. Label: Do not shake. Reconstitute each vial with 10 ml of sterile water for injection using a syringe with a 21-gauge needle or smaller. Direct stream to sides of vial. Do not use if vacuum not present in vial. Gently swirl solution by rotating vial to dilute; do not shake. May foam upon reconstitution; allow to stand for 5 minutes. Solution is colorless to light yellow and opalescent; a few translucent particles may develop as infliximab is a protein. Do not use if opaque particles, discoloration, or other particles occur. Withdraw volume of total infliximab dose from infusion container containing 250 ml 0.9% NaCl. Slowly add total dose of infliximab for a concentration ranging from 0.4 to 4 mg/ml. Mix gently. Do not reuse or store any portion of infusion. Use an in-line, sterile, non-pyrogenic, low protein-binding filter with 1.2 micron pore size or less. DOSAGE AND ADMINISTRATION Rheumatoid Arthritis Crohn's Disease or Fistulizing Crohn's Disease The recommended dose of REMICADE for children with moderately to severely active Crohn's disease is 5 mg/kg given as an induction regimen at 0, 2 and 6 weeks followed by a maintenance regimen of 5 mg/kg every 8 weeks. Ankylosing Spondylitis Psoriatic Arthritis Plaque Psoriasis Ulcerative Colitis Administration Instructions Regarding Infusion Reactions During infusion, mild to moderate infusion reactions may improve following slowing or suspension of the infusion, and upon resolution of the reaction, reinitiation at a lower infusion rate and/or therapeutic administration of antihistamines, acetaminophen, and/or corticosteroids. For patients that do not tolerate the infusion following these interventions, REMICADE should be discontinued. During or following infusion, patients that have severe infusion-related hypersensitivity reactions should be discontinued from further REMICADE treatment. The management of severe infusion reactions should be dictated by the signs and symptoms of the reaction. Appropriate personnel and medication should be available to treat anaphylaxis if it occurs. Preparation and Administration Instructions REMICADE vials do not contain antibacterial preservatives. Therefore, the vials after reconstitution should be used immediately, not re-entered or stored. The diluent to be used for reconstitution is 10 mL of Sterile Water for Injection, USP. The total dose of the reconstituted product must be further diluted to 250 mL with 0.9% Sodium Chloride Injection, USP. The infusion concentration should range between 0.4 mg/mL and 4 mg/mL. The REMICADE infusion should begin within 3 hours of preparation. 1. Calculate the dose and the number of REMICADE vials needed. Each REMICADE vial contains 100 mg of infliximab. Calculate the total volume of reconstituted REMICADE solution required. 2. Reconstitute each REMICADE vial with 10 mL of Sterile Water for Injection, USP, using a syringe equipped with a 21-gauge or smaller needle. Remove the flip-top from the vial and wipe the top with an alcohol swab. Insert the syringe needle into the vial through the center of the rubber stopper and direct the stream of Sterile Water for Injection, USP, to the glass wall of the vial. Gently swirl the solution by rotating the vial to dissolve the lyophilized powder. Avoid prolonged or vigorous agitation. DO NOT SHAKE. Foaming of the solution on reconstitution is not unusual. Allow the reconstituted solution to stand for 5 minutes. The solution should be colorless to light yellow and opalescent, and the solution may develop a few translucent particles as infliximab is a protein. Do not use if opaque particles, discoloration, or other foreign particles are present. 3. Dilute the total volume of the reconstituted REMICADE solution dose to 250 mL with 0.9% Sodium Chloride Injection, USP, by withdrawing a volume of 0.9% Sodium Chloride Injection, USP, equal to the volume of reconstituted REMICADE from the 0.9% Sodium Chloride Injection, USP, 250 mL bottle or bag. Slowly add the total volume of reconstituted REMICADE solution to the 250 mL infusion bottle or bag. Gently mix. 4. The infusion solution must be administered over a period of not less than 2 hours and must use an infusion set with an in-line, sterile, non-pyrogenic, low-protein-binding filter (pore size of 1.2 µm or less). Any unused portion of the infusion solution should not be stored for reuse. 5. No physical biochemical compatibility studies have been conducted to evaluate the co-administration of REMICADE with other agents. REMICADE should not be infused concomitantly in the same intravenous line with other agents. 6. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. If visibly opaque particles, discoloration or other foreign particulates are observed, the solution should not be used. Storage HOW SUPPLIED NDC 57894-030-01 100 mg infliximab in a 20 mL vial ©Centocor, Inc. 2006 Source: [package insert] |
U.S. label preparation
Remicade · Reconstitution and dilution
- Preparation
- Add 10 mL sterile water for injection to each 100 mg vial to obtain 10 mg/mL. For the standard 250 mL preparation, replace an equal volume of 0.9% sodium chloride with reconstituted drug. Maintain 0.4 to 4 mg/mL and use a larger volume if needed.
- Administration and handling
- Infuse over at least 2 hours through a sterile low protein-binding in-line filter of 1.2 microns or smaller.
Product and source details
Janssen Biotech, Inc. · BLA103772
Product NDC: 57894-030
SPL effective 2025-06-03 | SPL version 37. Checked 2026-11-13.
Source for this summary: U.S. prescribing information. Use the full label for dose selection, contraindications, preparation tables and monitoring.
Reviewed product information
Remicade 100 mg IV vial, adult preparation.
The cited hospital guide and U.S. product label support the adult statements shown. Use the U.S. label for other methods and populations.
Preparation sources checked 2026-11-13.
Reconstitution
Reconstitute the 100 mg vial with 10 mL sterile water for injection.
Sources and exact locations
Claim ID: IVR-72-REMICADE-001
Review basis: Separately edited institutional reference
Source 1
Remicade U.S. prescribing information (opens in a new tab)
Exact location: 2.11
Publisher: Janssen Biotech, Inc. / DailyMed
Source family: U.S. product labeling a0a046c1-056d-45a9-bfd9-13b47c24f257
Retrieved: 2026-11-13
Source 2
Infliximab adult IV guide (opens in a new tab)
Exact location: Reconstitution
Publisher: Galway University Hospitals Medicines Information
Source family: Galway University Hospitals
Retrieved: 2026-11-13
Dilution
Use 0.9% sodium chloride and keep the final concentration at or below 4 mg/mL.
Sources and exact locations
Claim ID: IVR-72-REMICADE-002
Review basis: Separately edited institutional reference
Source 1
Remicade U.S. prescribing information (opens in a new tab)
Exact location: 2.11
Publisher: Janssen Biotech, Inc. / DailyMed
Source family: U.S. product labeling a0a046c1-056d-45a9-bfd9-13b47c24f257
Retrieved: 2026-11-13
Source 2
Infliximab adult IV guide (opens in a new tab)
Exact location: Infusion fluids and Methods of intravenous administration
Publisher: Galway University Hospitals Medicines Information
Source family: Galway University Hospitals
Retrieved: 2026-11-13
Product identifiers and clinical review status
U.S. label preparation available. Full monograph review pending.
Selected product identity
Matched IV presentation for the stated adult preparation steps.
View product identifiers and primary-label provenance
- Selected product scope
- Remicade 100 mg IV vial, adult preparation.
- Labeler
- Janssen Biotech, Inc.
- Application number(s)
- BLA103772
- NDC(s)
- 57894-030
- DailyMed Set ID
- a0a046c1-056d-45a9-bfd9-13b47c24f257
- SPL version
- 37
- Label printed revision date
- Not established
- SPL effective date
- 2025-06-03
- Retrieved
- 2026-11-13
- Downloaded XML SHA-256
- 801d858f46440c1a5ec5e9782717ba73c6547e8c4bab158bd518d86825cb2db2
What remains to be completed
- Complete indication- and age-specific dosing, incompatibility, monitoring and stability review.
- Assess any proposed compounding BUD for the exact formulation, concentration, container and conditions.
Open the original GlobalRPh site monograph (historical; not revalidated) (opens in a new tab)