Skip to application
All calculators and tools
IV Dilution & Medication Referencev7.4
Back to resultsA-Z list

Acyclovir

Dilution requiredFull monograph review pending

Jump to a section

Historical dilution reference. Verify the preparation against the label for the product in hand.

Original GlobalRPh article: Zovirax® (acyclovir) (opens in a new tab)Original source URL: https://globalrph.com/dilution/zovirax-acyclovir/ Retrieved 2026-11-04

Historical source details

Original publication date: unavailable in the retrieved article.

Source location and file checksums
Original source URL
https://globalrph.com/dilution/zovirax-acyclovir/ (opens in a new tab)
Source date
Not established in the retrieved source
Retrieved
2026-11-04T19:45:39.489906+00:00
Source location
div.post-content
Packaged content SHA-256
0ea9a7bea5d6f3369147af582ab9e4ac50c45a8167fea3832011959c307a0088
Original response SHA-256
82a5ef25230e57bc62914540c9b0b1500f1f81f76b12825ad0037c86332f4a0f
Source body SHA-256
27735c41cdf1e1ee62ac2c9af40504ef35b337882249a0945a3ad670ca0f9f38

Acyclovir - Zovirax ®

Usual Diluents

D5W, NS

Standard Dilutions [Amount of drug] [Infusion volume] [Infusion rate]

Admixture:
[0-350 mg] [50 ml] [1 hour]
[351-700 mg] [100 ml] [1 hour]

Stability / Miscellaneous

Label: Do not refrigerate.
Maximum concentration = 7 mg/ml.

Stability data:

Acyclovir Powder
Stability Refrigerated
:
Stability Room Temp: The reconstituted solution should be used within 12 hours.

Once diluted for administration, each dose should be used within 24 hours.
Reconstituted Vial/Powder: powder


Notes: Refrigeration of reconstituted solution may result in the formation of a precipitate which will redissolve at room temperature.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.


Acyclovir Solution
Stability Refrigerated:
Stability Room Temp: Once diluted for administration, each dose should be used within 24 hours.
Reconstituted Vial/Powder: Solution

Notes: Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

Method of Preparation
Each 10 mL vial contains acyclovir sodium equivalent to 500 mg of acyclovir. Each 20 mL vial contains acyclovir sodium equivalent to 1000 mg of acyclovir. The contents of the vial should be dissolved in Sterile Water for Injection as follows:

Contents of Vial - Amount of Diluent
500 mg 10 mL
1000 mg 20 mL

The resulting solution contains 50 mg acyclovir per mL (pH approximately 11). Shake the vial well to assure complete dissolution before measuring and transferring each individual dose. The reconstituted solution should be used within 12 hours. Refrigeration of reconstituted solution may result in the formation of a precipitate which will redissolve at room temperature.

DO NOT USE BACTERIOSTATIC WATER FOR INJECTION CONTAINING BENZYL ALCOHOL OR PARABENS.

DOSAGE AND ADMINISTRATION
CAUTION - RAPID OR BOLUS INTRAVENOUS INJECTION MUST BE AVOIDED (see package insert for WARNINGS and PRECAUTIONS).
INTRAMUSCULAR OR SUBCUTANEOUS INJECTION MUST BE AVOIDED (see package insert for WARNINGS).

ADMINISTRATION
The calculated dose should then be removed and added to any appropriate intravenous solution at a volume selected for administration during each 1 hour infusion. Infusion concentrations of approximately 7 mg/mL or lower are recommended. In clinical studies, the average 70 kg adult received between 60 and 150 mL of fluid per dose. Higher concentrations (e.g., 10 mg/mL) may produce phlebitis or inflammation at the injection site upon inadvertent extravasation. Standard, commercially available electrolyte and glucose solutions are suitable for intravenous administration; biologic or colloidal fluids (e.g., blood products, protein solutions, etc.) are not recommended.

Once diluted for administration, each dose should be used within 24 hours.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

Therapy should be initiated as early as possible following onset of signs and symptoms of herpes infections. A maximum dose equivalent to 20 mg/kg every 8 hours should not be exceeded for any patient.

DOSAGE
HERPES SIMPLEX INFECTIONS: MUCOSAL AND CUTANEOUS HERPES SIMPLEX (HSV-1 AND HSV-2) INFECTIONS IN IMMUNOCOMPROMISED PATIENTS:

Adults and Adolescents (12 years of age and older): 5 mg/kg infused at a constant rate over 1 hour, every 8 hours for 7 days.

Pediatrics (Under 12 years of age): 10 mg/kg infused at a constant rate over 1 hour, every 8 hours for 7 days.

SEVERE INITIAL CLINICAL EPISODES OF HERPES GENITALIS:
Adults and Adolescents (12 years of age and older): 5 mg/kg infused at a constant rate over 1 hour, every 8 hours for 5 days.

Herpes Simplex Encephalitis:
Adults and Adolescents (12 years of age and older): 10 mg/kg infused at a constant rate over 1 hour, every 8 hours for 10 days.

Pediatrics (3 months to 12 years of age): 20 mg/kg infused at a constant rate over at least 1 hour, every 8 hours for 10 days.

Neonatal Herpes Simplex Virus Infections (Birth to 3 months): 10 mg/kg infused at a constant rate over 1 hour, every 8 hours for 10 days. In neonatal herpes simplex infections, doses of 15 mg/kg or 20 mg/kg (infused at a constant rate over 1 hour every 8 hours) have been used; the safety and efficacy of these doses are not known.

VARICELLA ZOSTER INFECTIONS: ZOSTER IN IMMUNOCOMPROMISED PATIENTS:

Adults and Adolescents (12 years of age and older): 10 mg/kg infused at a constant rate over 1 hour, every 8 hours for 7 days.

Pediatrics (Under 12 years of age): 20 mg/kg infused at a constant rate over 1 hour, every 8 hours for 7 days.

Obese Patients: Obese patients should be dosed at recommended adult dose using Ideal Body Weight.

Patients with Acute or Chronic Renal Impairment: Refer to DOSAGE AND ADMINISTRATION section for recommended doses, and adjust the dosing interval as indicated in the Table below.

Separate renal reference: Open Renal Dosing Master (opens in a new tab)

Dosage Adjustments for Patients with Renal Impairment:

Separate renal reference: Open Renal Dosing Master (opens in a new tab)
Creatine Clearance
(mL/min/1.73 m2)
Percent of Recommended Dose Dosing Interval (hours)
> 50
25 - 50
10 - 25
0 - 10
100%
100%
100%
50%
8
12
24
24

Hemodialysis
For patients who require dialysis, the mean plasma half-life of acyclovir during hemodialysis is approximately 5 hours. This results in a 60% decrease in plasma concentrations following a 6 hour dialysis period. Therefore, the patient's dosing schedule should be adjusted so that an additional dose is administered after each dialysis.

Separate renal reference: Open Renal Dosing Master (opens in a new tab)

Peritoneal Dialysis
No supplemental dose appears to be necessary after adjustment of the dosing interval.

Separate renal reference: Open Renal Dosing Master (opens in a new tab)

HOW SUPPLIED
Acyclovir for Injection USP is available as:
10 mL sterile vials, each containing acyclovir sodium equivalent to
500 mg of acyclovir, carton of 10. (NDC 55390-612-10).

20 mL sterile vials, each containing acyclovir sodium equivalent to 1000 mg of acyclovir, carton of 10. (NDC 55390-613-20).

Store between 15° to 25° C (59° to 77° F).

Open this historical article on its own

U.S. label preparation

Eugia acyclovir sodium 50 mg/mL concentrate · Dilution required

Preparation
Further dilute the calculated dose in a compatible IV solution. The U.S. label recommends an infusion concentration of approximately 7 mg/mL or less.
Administration and handling
Infuse over 1 hour. Avoid rapid injection or IV bolus.
Product and source details

Eugia US LLC · ANDA203701

Product NDC: 55150-154, 55150-155

SPL effective 2023-07-05 | SPL version 7. Checked 2026-11-13.

Source for this summary: U.S. prescribing information. Use the full label for dose selection, contraindications, preparation tables and monitoring.

Reviewed product information

Applies to

Eugia Acyclovir Sodium Injection 50 mg/mL concentrate, 10 mL and 20 mL single-dose vials; not branded Zovirax and not NOVAPLUS AuroMedics packaging.

The adult infusion time and need for dilution are supported by both sources. Use the U.S. product label for the concentration of this concentrate.

Preparation sources checked 2026-11-13.

Dilution

For an adult IV infusion, dilute the concentrate before administration.

Sources and exact locations

Claim ID: IVR-73-ACYCLOVIR-001

Review basis: Separately authored institutional guidance

  1. Source 1

    Acyclovir Sodium Injection, Eugia US LLC (opens in a new tab)

    Exact location: DOSAGE AND ADMINISTRATION > Administration; section UUID 860adb9c-28c9-43dc-b458-fc844e890cf0

    Publisher: DailyMed / current submitted U.S. prescribing information

    Source family: U.S. product prescribing information

    Retrieved: 2026-11-04T18:47:15.889183+00:00

  2. Source 2

    Acyclovir adult IV guide (opens in a new tab)

    Exact location: Reconstitution and Methods of intravenous administration

    Publisher: Galway University Hospitals Medicines Information

    Source family: Galway University Hospitals Medicines Information

    Retrieved: 2026-11-13

Infusion

Administer each diluted dose by IV infusion over 1 hour.

Sources and exact locations

Claim ID: IVR-ACYCLOVIR-002

Review basis: Separately authored institutional guidance

  1. Source 1

    Acyclovir Sodium Injection, Eugia US LLC (opens in a new tab)

    Exact location: DOSAGE AND ADMINISTRATION > Administration; section UUID 860adb9c-28c9-43dc-b458-fc844e890cf0

    Publisher: DailyMed / current submitted U.S. prescribing information

    Source family: U.S. product prescribing information

    Retrieved: 2026-11-04T18:47:15.889183+00:00

  2. Source 2

    Acyclovir adult IV guide (opens in a new tab)

    Exact location: Reconstitution and Methods of intravenous administration

    Publisher: Galway University Hospitals Medicines Information

    Source family: Galway University Hospitals Medicines Information

    Retrieved: 2026-11-13

Mechanism

Viral thymidine kinase initiates activation of acyclovir; the resulting triphosphate inhibits herpesvirus DNA polymerase.

Mechanism provenance: Independently corroborated

Sources and exact locations

Claim ID: IVR-ACYCLOVIR-004

Review basis: Independent scientific review

  1. Source 1

    Acyclovir Sodium Injection, Eugia US LLC (opens in a new tab)

    Exact location: VIROLOGY > Mechanism of Antiviral Action; section UUID 1b1219e0-9cf5-42d0-b221-0c19d0ade9fe

    Publisher: DailyMed / current submitted U.S. prescribing information

    Source family: U.S. product prescribing information

    Retrieved: 2026-11-04T18:47:15.889183+00:00

  2. Source 2

    Elion GB. The biochemistry and mechanism of action of acyclovir. J Antimicrob Chemother. 1983;12 Suppl B:9-17 (opens in a new tab)

    Exact location: Abstract, paragraphs 1 and 2

    Publisher: Peer reviewed scientific review indexed by PubMed

    Source family: Elion 1983 mechanism review

    Retrieved: 2026-11-04T19:05:23.637968+00:00

  • Drug-specific molecular mechanism; reviewed scientific mechanism source is historical, not evidence of current dosing.
Product identifiers and clinical review status

U.S. label preparation available. Full monograph review pending.

Selected product identity

Exact selected U.S. product traced to current SPL; full identity reconciliation incomplete.

View product identifiers and primary-label provenance
Selected product scope
Eugia Acyclovir Sodium Injection 50 mg/mL concentrate, 10 mL and 20 mL single-dose vials; not branded Zovirax and not NOVAPLUS AuroMedics packaging.
Field ID: IVR-ACYCLOVIR-META-PRODUCT-SCOPE

Primary source (opens in a new tab) | Product data elements and the claim-specific formulation described in the cited preparation sections

Complete product reconciliation: pending.

Labeler
Eugia US LLC
Field ID: IVR-ACYCLOVIR-META-LABELER

Primary source (opens in a new tab) | SPL author/assignedEntity/representedOrganization/name

Complete product reconciliation: pending.

Application number(s)
ANDA203701
Field ID: IVR-ACYCLOVIR-META-APPLICATION-NUMBERS

Primary source (opens in a new tab) | SPL subjectOf/approval/id/@extension

Complete product reconciliation: pending.

NDC(s)
55150-154-10; 55150-155-20
Field ID: IVR-ACYCLOVIR-META-NDCS

Primary source (opens in a new tab) | SPL manufacturedProduct/asContent/containerPackagedProduct/code/@code and How Supplied

Complete product reconciliation: pending.

DailyMed Set ID
ae921e4e-b8ae-4a45-acc1-32e5e719812b
Field ID: IVR-ACYCLOVIR-META-SETID

Primary source (opens in a new tab) | SPL document/setId/@root

Complete product reconciliation: pending.

SPL version
7
Field ID: IVR-ACYCLOVIR-META-SPL-VERSION

Primary source (opens in a new tab) | SPL document/versionNumber/@value

Complete product reconciliation: pending.

Label printed revision date
March 2023 (printed revision); SPL effective July 5, 2023
Field ID: IVR-ACYCLOVIR-META-LABEL-REVISION-DATE

Primary source (opens in a new tab) | Printed revision statement in the selected label; distinct from SPL effectiveTime

Complete product reconciliation: pending.

SPL effective date
2023-07-05
Field ID: IVR-ACYCLOVIR-META-REVISION-DATE

Primary source (opens in a new tab) | SPL document/effectiveTime/@value

Complete product reconciliation: pending.

Retrieved
2026-11-04T18:47:15.889183+00:00
Field ID: IVR-ACYCLOVIR-META-RETRIEVED-AT

Primary source (opens in a new tab) | Timestamp recorded when source bytes were retrieved

Complete product reconciliation: pending.

Downloaded XML SHA-256
400cc0526c1cb55ce61117e149315aeb29f70f924195340fc51f8fad61d32172
Field ID: IVR-ACYCLOVIR-META-XML-SHA256

Primary source (opens in a new tab) | SHA-256 computed over the exact downloaded XML bytes

Complete product reconciliation: pending.

What remains to be completed
  • Complete indication- and age-specific dosing, incompatibility, monitoring and stability review.
  • Assess any proposed compounding BUD for the exact formulation, concentration, container and conditions.